DMA360 Air Sanitizer
Cómpralo antes de:
... y recíbelo mañana
13,90€ (+ VAT)
SODIUM CHLORITE KIT + ACTIVATOR 140 ML
Precursor for obtaining in situ a biocide (chlorine dioxide), exclusively for the purification and disinfection of water for human or animal consumption. Precursor included in art. 95 of Regulation EU 528/2012 of biocides.
Aqueous solution of NaCIO2 sodium chloride 25%, precursor substance of a biocide (chlorine dioxide) that is obtained in situ by acidification with the 4% HCL ACTIVATOR. The set consists of two packages, one of Sodium Chlorite (25%) and one HCl Activator (4%).
METHOD OF USE AND DOSAGE
For disinfection of drinking water:
One drop of HCl Activator is used for each drop of Sodium Chlorite (1: 1) .Dose 2 drops of sodium chlorite and 2 drops of activator for each liter of water to be treated, in a dry container (non-metallic) regardless of the number of activated drops. Wait a few seconds to obtain a golden amber color. The mixture needs to be diluted later in the water. Add water (> 150 ml) to stabilize the activated solution as soon as possible. The deep yellow color indicates the degree of saturation of the CIO2 gas that evaporates over time.
This yellowish solution must be diluted in the water to be treated as soon as possible to ensure maximum efficiency, and leave it to work for at least 30 min. Do not consume the treated water until the active chlorine level drops below 1.5 ppm. If, when measuring the level of chlorine, it is negligible, repeat the operation, until the level of active chlorine in the water is between 0.5-1.5 ppm. The quantity of product to be dosed and the exposure time will always depend on the quality of the water to be treated. Use with caution, always read labels and product information. Store in a cool, dry place, and upright.
Do not expose to sunlight to avoid degradation. Containers do not need to be kept in the refrigerator at reasonable temperatures when the ambient temperature is below 22-24ºC.
For disinfection of surfaces and tools in Food Industries and other areas of private life and public health:
Mix in equal parts, in a clean and dry (non-metallic) glass, 25 ml of Sodium Chlorite NaClO2 Solution (25%) and 25 ml of HCl Activator (4%), wait about 45-60 sec. until obtaining a golden amber color, and diluting the mixture in 5-10L in water, depending on the level of dirt, in a closed container. In a ventilated place, apply this dilution on the surfaces by means of cloth or mocho, or by immersion of the tools. Leave to act for at least 5 min. and then rinse with plenty of water before use.
The package contains 140 ml Sodium Chlorite + 4% HCL Activator
25% concentrated solution
Very high quality and purity.
Sodium chlorite should never be used alone. It should always be activated with a safe acid such as 4% HCL.
Mixing equal parts of sodium chlorite with an acid generates the disinfecting biocidal substance of Chlorine Dioxide.
Opaque 140 ml container, to preserve all its quality and its optimal conservation.
It is very important to note that exposing the contents to ultraviolet light deteriorates the product.
SODIUM CHLORITE HAZARD INDICATIONS
Use biocides in a safe way. Always read the label and information on the biocide before use.
Acute Tox. 4: H302 – Harmful if swallowed Aquatic Chronic 1: H410 – Very toxic to aquatic life with long lasting effects. Eye Dam. 1: H318 – Causes serious eye damage. Met. Corr. 1: H290 – May be corrosive to metals STOT RE 2: H373 – May cause damage to organs through prolonged or repeated exposure (Oral) EUH032: Contact with acids liberates very toxic gas.